Storage for light truck and passenger tires
Storage for truck, bus, military and aircraft tires
Tire handling equipment
Tire and wheel display
Wheel washer, inflation cage and other tire equipments
24' Tire Conveyor (TC-24)
Product number : TC-24
PHOTO A
PHOTO B
PHOTO C
Specifications |
|
|---|---|
| Conveyor Dimensions (L x l x H) Motor & Controls (L x l x H) |
288" x 21" x 11" 7315 x 533 x 279mm 36" x 27"1/2 x 14"1/2 914 x 699 x 368mm |
| Tire capacity | ~12 tires/minute |
| Load capacity | 500 lbs/230 kg |
| Weight | 390 lbs/191 kg |
| Color | Red |
 |
|
Tire conveyor installation
The tire conveyor is equipped with of a steel anchor plate at the bottom for stability. The installation only takes a few minutes, fix 4 anchors to the floor and plug into 220 volts electrical outlet.| • Length: | 24’ (7.32 m) |
| • Width: | 21''(450mm) |
| • Motor: | 2 HP |
| • Electricity: | 220V, 6.59A, 750W, 3 Phases, 50 HZ (15' cord installed) |
| • Belt: | 18'' x 3 / 8''- 2 ply (8mm) |
| • Cleats: | 4''high PVC, 60''on center |
| • Speed: | 58 feet/ min |
| • Bearing: | Sealed precision ball (no maintenance) |
| • Controls: | On / Off / Backwards at each end |
Tire conveyor use
It can be used to raise or lower tires. The cleats ensure that tires are properly seated use. The conveyor needs only two employees to handle tires and is ideal for the storage of tires on a higher floor, or on a mezzanine. They can be used for heavy truck tires or tires with rims as long as the conveyor capacity of 500lbs is respected. As solution tailored to that end, you will avoid dangerous handling of tires by your employees and their productivity will increase. With the right equipment, such as a tire cart (MTC) or a foldable rack (MLTFD) and dolly (MLTFD-D), you will be equipped to optimize your operations.
| 192" / 4.88m | 181" / 4.60m |
Warranty
The tire conveyor TC-24 has a 12 month warranty on parts and labour.
Easy to install
.jpg)
Ready to use, all that is necessary to do is secure it in place with the anchor plate and plug into a 220V outlet.
Cleats
.jpg)
4" high cleats help to keep the tires in place on the conveyor while in use as a connector floor to floor.The gard proctects from potential accidents.
Control Panel
.jpg)
Control buttons easy to use and locate. This control has start / stop / reverse and emergency stop functions that will be quickly found by the employees in the workplace.
Embed Embed this video on your site
Spare parts for this product |
|---|
 |
Users of this product |
|---|
| Manufacturer; Tire warehouse |
Tire warehouses
Tire distribution center
Tire warehouse
Tire depot
Tire wholesaler
Tire third party logistic (3PL)
Tire storage for clients' tires
Tire warehouse
Tire depot
Tire wholesaler
Tire third party logistic (3PL)
Tire storage for clients' tires
Manufacturers
Tire manufacturer
Wheel manufacturer
Automotive assembler
Tire and wheel sub-assembler
Wheel manufacturer
Automotive assembler
Tire and wheel sub-assembler
