Storage for light truck and passenger tires
Storage for truck, bus, military and aircraft tires
Tire handling equipment
Tire and wheel display
Wheel washer, inflation cage and other tire equipments
4 Tiers Tire Shelving (#MTS-924)
Product number : MTS-924
Photo Rack A
Photo Rack B
Photo Rack C
Specifications |
|
|---|---|
| Dimensions (LxWxH) | 92'' X 18'' X 120'' 2337 X 457 X 3048 mm |
| Tire capacity | 36 to 44 (9 to 11 per tier) |
| Loading capacity | 500 lbs / 227 kg (per tier) |
| Weight | 140 lbs / 64 kg |
| Colour | Gray |
 |
|
The 4-tiered tire shelving rack is perfect for small numbers of tires, either alone or mounted on rims. Whether you use it to hold your customers’ tires or to store tires for sale, keeping them on their treads instead of stacking them flat saves a lot of time. The lenght and the width of the rack is the same as the 3 tiers tire shelving and the 5 tiers tire shelving. Only the height varies from one model to another.
The shelves are adjustable in 1½” increments, allowing the tiers to be adjusted to suit the tire sizes. It is easier to put the heavier tires in the bottom tier to facilitate the task for employees. A special ladder might be nessary to do the picking on the last tier, ask your sale representative about it.
Tire storage capacity
Each tier holds 9-11 passenger or light truck tires, for a total of 36-44 tires per rack. Each of the 4 tiers can take up to 500 lbs. The sectional rails are tilted to 45 degrees to properly seat the tires, leaving them less marked at the end of the season. This rack is also easier to load and unload than standard pallet racks.The shelves are adjustable in 1½” increments, allowing the tiers to be adjusted to suit the tire sizes. It is easier to put the heavier tires in the bottom tier to facilitate the task for employees. A special ladder might be nessary to do the picking on the last tier, ask your sale representative about it.
Shelving installation
The shelf unit sets up with ease in 25 minutes. A screwdriver for the centre braces and a hammer, or preferably a rubber mallet, is needed to attach the uprights to the rails. The clip fasteners work with no additional hardware, similar to Baby Rack or Ready Rack systems.
The legs are drilled for floor fasteners included in the box. In some areas, floor anchoring is mandatory. Wall brackets are also included and are usually mounted at the top of the rack to provide greater stability for unloading from the top tier. Martins Industries strongly recommend to anchor the shelving to the wall and to the floor. The same brackets can be used to attach one rack in front of another. Plate fasteners are used to attach them side by side. Assembled in this way, the shelving racks form a sturdy unit. Although Martins Industries does not include installation, we can refer you to an installer for larger numbers of units.
The legs are drilled for floor fasteners included in the box. In some areas, floor anchoring is mandatory. Wall brackets are also included and are usually mounted at the top of the rack to provide greater stability for unloading from the top tier. Martins Industries strongly recommend to anchor the shelving to the wall and to the floor. The same brackets can be used to attach one rack in front of another. Plate fasteners are used to attach them side by side. Assembled in this way, the shelving racks form a sturdy unit. Although Martins Industries does not include installation, we can refer you to an installer for larger numbers of units.
Tire warehouse planning
Martins industries offers a warehouse storage planning service free of charge. For determining the right aisle widths and rack arrangements, our warehouse experts can come to your facility and produce a plan to store a maximum number of tires per square foot.
Warranty
All our tire equipment, shop equipment, tire machinery, tire displays and tire racking are covered by a 2-year warranty.
WALL BRACKET
The rack can be fastened to the wall with 2 wall brackets. The same brackets can be used to fasten racks one in front of another.
Bracket for multiple racks
Plate fasteners are used to attach 2 tire shelving units side by side, forming a sturdier tire storage system.
Assembly instructions
The shelving rack can be assembled in 25 minutes. It comes in a 120” x 11” x 5” box that weighs 140 lbs. Click here to download assembly instructions (pdf).
Spare parts for the tire shelving |
|---|
| Wall bracket; Bracket between shelving |
The tire shelving is mainly used by |
|---|
| Gouvernment; Car dealership; Tire shop |
* Terms and conditions for spare parts
All our products have a 2 years warranty. Spare parts are free of charge during the first 2 years.
For more informations visit our terms and conditions. For other spare part, contact us.
